Determination of Optimal Geometric Parameters of the Windshield Device Limiting the Spray Drift by Wind in Herbicides Spraying
DOI:
https://doi.org/10.1515/agriceng-2016-0008Keywords:
drop, flow, speed, movement, trajectory, drift, windshield deviceAbstract
The objective of the paper is to determine the optimal geometric parameters of the windshield device limiting the spray drift by wind in herbicides spraying. Tests were carried out with the use of the planning methods of experiments and statistical methods of processing of the obtained results. The result of the research consisted in obtaining structural parameters of the windshield made in the shape of gratings with rectangular boards. It was found out that this device may be used at the wind speed exceeding agrotechnological sizes. The research results will be used in the work on devices protecting against wind at a precise herbicides spraying.
Downloads
Published
2016-07-24
Issue
Section
Articles
How to Cite
Determination of Optimal Geometric Parameters of the Windshield Device Limiting the Spray Drift by Wind in Herbicides Spraying. (2016). Agricultural Engineering , 20(1), 79–89. https://doi.org/10.1515/agriceng-2016-0008
Most read articles by the same author(s)
- Dariusz Kwaśniewski, Maciej Kuboń, Economic Effectiveness of Straw Pellets Production , Agricultural Engineering : Vol. 20 No. 4 (2016)
- Nataliia Kovalenko, Taras Hutsol, Vitalii Kovalenko, Szymon Glowacki, Sergii Kokovikhin, Oleksander Mudragel, Maciej Kuboń, Wioletta Tomaszewska-Górecka, Hydrogen Production Analysis: Prospects for Ukraine , Agricultural Engineering : Vol. 25 (2021)
- Miroslav Prístavka, Pavol Findura, Ivan Beloev, Maciej Kuboń, Veronika Hrdá, Stepan Kovalyshyn, Taras Shchur, Verification of the Measurement System in a Production Organization , Agricultural Engineering : Vol. 26 (2022)
- Maciej Sporysz, Maria Szczuka, Sylwester Tabor, Krzysztof Molenda, Maciej Kuboń, Cluster Analysis in Assessment of Organic Farms Sustainability. Part II Results of Research , Agricultural Engineering : Vol. 24 No. 1 (2020)
- Wacław Romaniuk, Tetyana Zheliezna, Semen Drahniev, Anatoliy Bashtovyi, Henryk Sobczuk, Andrzej Marczuk, Liudmyla Titova, Ivan Rogovskii, Kinga Borek, Prospects for Production and Consumption of Second Generation Biofuels in Ukraine , Agricultural Engineering : Vol. 22 No. 4 (2018)
- Marcin Gaura, Maciej Kuboń, Zbigniew Kowalczyk, Dariusz Kwaśniewski, Zbigniew Daniel, Krzysztof Kapela, Quality Assessment of Delivery in the Supply Chain Optimization , Agricultural Engineering : Vol. 24 No. 3 (2020)
- Jan Radosław Kamiński, Cheslav Zhdanovich, Michail Mamonov, Maciej Kuboń, Effect of Steering Gear Parameters of Crawler Tractor Cornering Ability , Agricultural Engineering : Vol. 20 No. 2 (2016)
- Jan Radosław Kamiński, Maciej Kuboń, Irina Dmitrevna Ivanova, Andreev Viktorovich Sergutenko, The Analysis of the State Space of Management Process in the Industry Applying Expert Systems , Agricultural Engineering : Vol. 21 No. 2 (2017)
- Waclaw Romaniuk, Victor Polishсhuk, Andrzej Marczuk, Liudmyla Titovab, Ivan Rogovskii, Kinga Borek, Impact of Sediment Formed in Biogas Production on Productivity of Crops and Ecologic Character of Production of Onion for Chives , Agricultural Engineering : Vol. 22 No. 1 (2018)
- Elżbieta Olech, Maciej Kuboń, Clients' Preferences and Development of Organic Food Distribution Channels , Agricultural Engineering : Vol. 20 No. 1 (2016)