Impact of Coffee Grounds Addition on the Calorific Value of the Selected Biological Materials
DOI:
https://doi.org/10.1515/agriceng-2016-0018Keywords:
coffee grounds, heat of combustion, calorific value, mixtureAbstract
The objective of the paper was, inter alia, to determine the impact of coffee grounds on the heat of combustion of their combination with other biological materials. Research on the heat of combustion and calculations of the calorific value were carried out with the use of a KL-12 Mn calorimeter according to the technical specifications and standards PN-81/G–04513 i PN-ISO 1928:2002. Coffee grounds, tea grounds, pine wood and yellow wheat straw were used in the research. The heat of combustion of particular substrates was determined and then their mixtures with coffee grounds in the following proportion were prepared: 75% substrate – 25% coffee grounds, 50% substrate – 50% coffee grounds, 25% substrate – 75% coffee grounds. Calorific value of particular substrates was increasing with the amount of added coffee grounds. Their biggest flow was reported in the mixture of 50%/50% of coffee grounds and wheat straw and the smallest in case of coffee grounds and wood on account of a similar calorific value of both substrates.Downloads
Published
2016-07-24
Issue
Section
Articles
How to Cite
Impact of Coffee Grounds Addition on the Calorific Value of the Selected Biological Materials. (2016). Agricultural Engineering , 20(1), 177-183. https://doi.org/10.1515/agriceng-2016-0018
Most read articles by the same author(s)
- Krzysztof Łapiński, Piotr Sołowiej, The Possibilities of a Multifunctional Control and Measure-Ment System Installed in a Small Hydropower Plant , Agricultural Engineering : Vol. 24 No. 4 (2020)
- Tomasz Jakubowski, Piotr Sołowiej, Dynamics of Temperature Changes in Thermophille Phase of Composting Process in The Aspect of Sanitary Condition of Obtained Material , Agricultural Engineering : Vol. 20 No. 4 (2016)
- Maciej Neugebauer, Kitchen and Garden Waste as a Source of Heat for Greenhouses , Agricultural Engineering : Vol. 22 No. 1 (2018)