Assessment of Sowing Quality of Radish Seeds with Working Unit of Pneumatic Seeder
Keywords:
seeds, radish, point sowing, qualityAbstract
The objective of the research was assessment of the sowing quality of radish seeds with the sowing unit of “MAX PNEUAMTIC” S 156 pneumatic seeder. Tests were carried out on the original laboratory stand. They proved that at the assumed range of the working speed within 2.5 to 4.0 km·h−1 and rotations of the sowing disc between 23 and 37 rot·min−1, the most favourable results concerning precision of seeds spacing in a row were obtained at the speed between 2.5 and 3.0 km·h−1. The increase of the speed above 3.0 km·h−1 caused deterioration of the seeds sowing quality through statistically significant reduction of the single sowing participation and the increase of the empty sowings participation.Downloads
Published
2017-12-01
Issue
Section
Articles
How to Cite
Assessment of Sowing Quality of Radish Seeds with Working Unit of Pneumatic Seeder. (2017). Agricultural Engineering , 21(4), 47-53. https://ojs.agriceng.org/index.php/AgricEng/article/view/45
Most read articles by the same author(s)
- Artur Kraszkiewicz, Ignacy Niedziółka, Stanisław Parafiniuk, Maciej Sprawka, Małgorzata Dula, Assessment of Selected Physical Characteristics of the English Ryegrass (Lolium Perenne L.) Waste Biomass Briquettes , Agricultural Engineering : Vol. 23 No. 4 (2019)
- Maciej Domański, Jarosław Paszkowski, Sergey Otroshko, Janusz Zarajczyk, Dariusz Siłuch, Analysis of Energy Properties of Granulated Plastic Fuels and Selected Biofuels , Agricultural Engineering : Vol. 24 No. 3 (2020)
- Szymon Ignaciuk, Janusz Zarajczyk, Assessment of Selected Parameters of Sowing Quality of Vistula Parsley Seeds with a Precision Seed Drill with a Pneumatic Seeding System , Agricultural Engineering : Vol. 24 No. 2 (2020)
- Jarosław Paszkowski, Maciej Domański, Jacek Caban, Janusz Zarajczyk, Miroslav Pristavka, Pavol Findura, The Use of Refuse Derived Fuel (RDF) in the Power Industry , Agricultural Engineering : Vol. 24 No. 3 (2020)
- Ignacy Niedziółka, Beata Zaklika, Assessment of Physical Properties of Briquettes Made of Mixtures of Selected Plant Raw Materials and Post-Fermentation Waste , Agricultural Engineering : Vol. 20 No. 1 (2016)