Verification of the Measurement System in a Production Organization
DOI:
https://doi.org/10.2478/agriceng-2022-0007Keywords:
accuracy of measurement device, repeatability, reproducibilityAbstract
Monitoring the accuracy of meters by qualified workers and managers is a preventive measure of every organization. The paper focuses on monitoring the accuracy of measuring devices and proposes preventive and corrective actions. The discussed measurement device was tested for accuracy using accuracy indexes Cg and Cgk. The identified deviations in measurements showed that the meter was not fully efficient. Consequently, actions were taken to ensuring that the measurement device is accurate.
References
Baráth, M., Žitňanský, J., Beloev, H.I. (2020). Influence of cutting speed to vibrations and roughness of machined surface during turning. Agricultural, forest and transport machinery and technologies, 7(1), 70-75.
Borovička, M., Janáč, A., Gӧrӧg, A. (2005). Metrology. Bratislava, Slovakia: STU. ISBN 80-227-2198-0
Bujna, M., Beloev, C.I. (2015). Tools of risk management in production processes. Ruse, Bulgaria: Angel Kanchev University of Ruse. ISBN 978-954-712-654-1.
Čech, J. - Pernikář, J. - Podaný, K. (2005). Industrial metrology. Brno, Czech Republic: Higher education technical in Brno. ISBN 80-214-3070-2.
Holub, M., Jankovych, R., Andrs, O., Kolibal, Z. (2018). Capability assessment of CNC machining centres as measuring devices. Measurement: Journal of the International Measurement Confederation, 118, 52-60. doi:10.1016/j.measurement.2018.01.00710.1016/j.measurement.2018.01.007
Kelemenová, T., Dovica, M. (2016). Calibration of meters. Košice, Slovakia: Technical University in Košice. ISBN 978-80-553-3069-3
Kuchtová, E. (2020). Analysis of the measurement system in selected organization. [Bachelor thesis], Nitra, Slovakia: Slovak University of Agriculture.
Paulová, I. (2013). Complex quality management. Bratislava, Slovakia: Iura Edition. ISBN 978-80-8078-574-1
Petrík, J. (2004). Metrology in quality management. Košice, Slovakia: Technical University in Košice. ISBN 80-8073-259-0
Polák, P., Poláková, Z., Žitňanský, J., Dostál, P., Kollárová, K. (2016). Improving the machining process by analysing the relationship between cutting force and temperature in drilling of engineering steels. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 64(3), 855-861.10.11118/actaun201664030855
Turisová, R., Pačaiová, H. (2017). Production quality engineering. Košice, Slovakia: Technical University in Košice, Faculty of Engineering. ISBN 978-80-553-2656-6.
Vicario, G., Pennecchi, F. (2020). Special Section on Mathematical and Statistical Methods for Metrology. Measurement Science and Technology, 31(12), 120101.10.1088/1361-6501/ab9dc0
Žitňanský, J., Polák, P. (2019). Metrology in quality management. Nitra, Slovakia: Slovak University of Agriculture. ISBN 978-80-552-2072-7.
Downloads
Published
Issue
Section
How to Cite
Most read articles by the same author(s)
- Jan Barwicki, Maciej Kuboń, Andrzej Marczuk, New Developments of Solar Energy Utilization in the Aspect of EU Directives , Agricultural Engineering : Vol. 21 No. 2 (2017)
- Ingrid A.B. Pena, Isabella L. Lucas, Rodrigo Penna-Firme, Bernardo Strassburg, Adam Drosik, Lech Rubisz, Maciej Kubon, Hubert Latala, Katarzyna Grotkiewicz , Krzysztof Kubon , André C.S. Batalhão, Agnieszka E. Latawiec, Survey-Based Qualitative Analysis of Young Generation Perception of Sustainable Development in Poland , Agricultural Engineering : Vol. 24 No. 4 (2020)
- Yaroslava Larina, Julia Galchynska, Petro Kucheruk, Оksana Zghurska, Ganna Ortina, Faten Al-Nadzhar, Tetiana Marusei, Maciej Kuboń, Grzegorz Dzieniszewski, Estimation of the Domestic Agricultural Sector Potential for the Growth of Energy Cultures for Bioenergy Fuel Production , Agricultural Engineering : Vol. 25 (2021)
- Grzegorz Dzieniszewski, Maciej Kuboń, Miroslav Pristavka, Pavol Findura, Operating Parameters and Environmental Indicators of Diesel Engines Fed with Crop-Based Fuels , Agricultural Engineering : Vol. 25 (2021)
- I.S. Kruk, O.V. Gordeenko, T.P. Kot, Andrzej Marczuk, Jan Kamiński, Maciej Kuboń, Determination of Optimal Geometric Parameters of the Windshield Device Limiting the Spray Drift by Wind in Herbicides Spraying , Agricultural Engineering : Vol. 20 No. 1 (2016)
- Vladislav Zubko, Viktor Sirenko, Tetiana Kuzina, Viktor Onychko, Serhii Sokolik, Hynek Roubik, Milan Koszel, Taras Shchur, Modelling Wheat Grain Flow During Sowing Based on the Model of Grain with Shifted Center of Gravity , Agricultural Engineering : Vol. 26 (2022)
- Nataliia Kovalenko, Taras Hutsol, Vitalii Kovalenko, Szymon Glowacki, Sergii Kokovikhin, Oleksander Mudragel, Maciej Kuboń, Wioletta Tomaszewska-Górecka, Hydrogen Production Analysis: Prospects for Ukraine , Agricultural Engineering : Vol. 25 (2021)
- Maciej Sporysz, Maria Szczuka, Sylwester Tabor, Krzysztof Molenda, Maciej Kuboń, Cluster Analysis in Assessment of Organic Farms Sustainability. Part II Results of Research , Agricultural Engineering : Vol. 24 No. 1 (2020)
- Andrii Voitik, Vasyl Kravchenko, Olexandr Pushka, Tetyana Kutkovetska, Taras Shchur, Sławomir Kocira, Comparison of NDVI, NDRE, MSAVI and NDSI Indices for Early Diagnosis of Crop Problems , Agricultural Engineering : Vol. 27 (2023)
- Kamil Depo, Agnieszka Szparaga, Miroslav Pristavka, Sławomir Kocira, Usable Agricultural Area of Farms and their Material and Energy Expenditure Efficiency , Agricultural Engineering : Vol. 24 No. 1 (2020)