Verification of the Measurement System in a Production Organization
DOI:
https://doi.org/10.2478/agriceng-2022-0007Keywords:
accuracy of measurement device, repeatability, reproducibilityAbstract
Monitoring the accuracy of meters by qualified workers and managers is a preventive measure of every organization. The paper focuses on monitoring the accuracy of measuring devices and proposes preventive and corrective actions. The discussed measurement device was tested for accuracy using accuracy indexes Cg and Cgk. The identified deviations in measurements showed that the meter was not fully efficient. Consequently, actions were taken to ensuring that the measurement device is accurate.
References
Baráth, M., Žitňanský, J., Beloev, H.I. (2020). Influence of cutting speed to vibrations and roughness of machined surface during turning. Agricultural, forest and transport machinery and technologies, 7(1), 70-75.
Borovička, M., Janáč, A., Gӧrӧg, A. (2005). Metrology. Bratislava, Slovakia: STU. ISBN 80-227-2198-0
Bujna, M., Beloev, C.I. (2015). Tools of risk management in production processes. Ruse, Bulgaria: Angel Kanchev University of Ruse. ISBN 978-954-712-654-1.
Čech, J. - Pernikář, J. - Podaný, K. (2005). Industrial metrology. Brno, Czech Republic: Higher education technical in Brno. ISBN 80-214-3070-2.
Holub, M., Jankovych, R., Andrs, O., Kolibal, Z. (2018). Capability assessment of CNC machining centres as measuring devices. Measurement: Journal of the International Measurement Confederation, 118, 52-60. doi:10.1016/j.measurement.2018.01.00710.1016/j.measurement.2018.01.007
Kelemenová, T., Dovica, M. (2016). Calibration of meters. Košice, Slovakia: Technical University in Košice. ISBN 978-80-553-3069-3
Kuchtová, E. (2020). Analysis of the measurement system in selected organization. [Bachelor thesis], Nitra, Slovakia: Slovak University of Agriculture.
Paulová, I. (2013). Complex quality management. Bratislava, Slovakia: Iura Edition. ISBN 978-80-8078-574-1
Petrík, J. (2004). Metrology in quality management. Košice, Slovakia: Technical University in Košice. ISBN 80-8073-259-0
Polák, P., Poláková, Z., Žitňanský, J., Dostál, P., Kollárová, K. (2016). Improving the machining process by analysing the relationship between cutting force and temperature in drilling of engineering steels. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 64(3), 855-861.10.11118/actaun201664030855
Turisová, R., Pačaiová, H. (2017). Production quality engineering. Košice, Slovakia: Technical University in Košice, Faculty of Engineering. ISBN 978-80-553-2656-6.
Vicario, G., Pennecchi, F. (2020). Special Section on Mathematical and Statistical Methods for Metrology. Measurement Science and Technology, 31(12), 120101.10.1088/1361-6501/ab9dc0
Žitňanský, J., Polák, P. (2019). Metrology in quality management. Nitra, Slovakia: Slovak University of Agriculture. ISBN 978-80-552-2072-7.
Downloads
Published
Issue
Section
How to Cite
Most read articles by the same author(s)
- Stanislaw Derehajło, Magdalena Tymińska, Zbigniew Skibko, Andrzej Borusiewicz, Waclaw Romaniuk, Maciej Kuboń, Elżbieta Olech, Milan Koszel, Heavy Metal Content in Substrates in Agricultural Biogas Plants , Agricultural Engineering : Vol. 27 (2023)
- Mariusz Sojak, Szymon Głowacki, Weronika Tulej, Andrzej Bryś, Taras Hutsol, Iryna Horetska, Liliia Stroianovska, Anna Rozkosz, Miroslav Prístavka, The Expert System Supporting Decision-Making in the Process of Vegetable Pests Extermination During Vegetation Period , Agricultural Engineering : Vol. 27 (2023)
- Stepan Kovalyshyn, Vadym Ptashnyk, Bohdan Nester, Paweł Kiełbasa, Oleh Ovcharuk, Oleg Kovalyshyn, Oleg Tkach, Mykola Biliuk, Vladyslav Shubenko, Optimization of the Modes of Pre-Sowing Electrical Stimulation of Winter Rape Seeds Based on the Study of the Intensity of Single Photon Emission by Them , Agricultural Engineering : Vol. 28 (2024)
- Vadym Bredykhin, Taras Shchur, Liliia Kis-Korkishchenko, Serhii Denisenko, Serhii Ivashchenko, Andrzej Marczuk, Oleg Dzhidzhora, Maciej Kubon, Determination of Ways of Improving the Process of Separation of Seed Materials on the Working Surface of the Pneumatic Sorting Table , Agricultural Engineering : Vol. 28 (2024)
- Leszek Rydzak, Kostiantyn Vasiukov, Tomasz Guz, Marek Domin, Stepan Kovalyshyn, Piotr Kiczorowski, Effect of the Addition of Selected Unmalted Raw Materials to Barley Malt on Selected Parameters of Malt Extracts , Agricultural Engineering : Vol. 28 (2024)
- Marián Bujna, Miroslav Prístavka, Chia Kuang Lee, Zuzana Strápeková, Krzysztof Kapela, Zoran Malicevic, Determining the Reliability Level by Combining FMEA, FTA and Dematel Tools , Agricultural Engineering : Vol. 28 (2024)
- Anna Krawczuk, Jacek Ogrodniczek, Andrea Bohata, Petr Bartos, Pavel Olšan, Pavol Findura, Sławomir Kocira, Physical Properties of Plant Extracts with Biostimulant Potential Produced Using Cold Plasma and Low-Pressure Microwave Discharge , Agricultural Engineering : Vol. 28 (2024)
- Vasul Salo, Valerii Pastukhov, Serhii Leshchenko, Taras Shchur, Oleg Dzhidzhora, Katarzyna Szwedziak, Stanisław Parafiniuk, Differentiation of the Composition of Combined Soil-Tillage Machines depending on the Conditions of Use , Agricultural Engineering : Vol. 28 (2024)