Verification of the Measurement System in a Production Organization
DOI:
https://doi.org/10.2478/agriceng-2022-0007Keywords:
accuracy of measurement device, repeatability, reproducibilityAbstract
Monitoring the accuracy of meters by qualified workers and managers is a preventive measure of every organization. The paper focuses on monitoring the accuracy of measuring devices and proposes preventive and corrective actions. The discussed measurement device was tested for accuracy using accuracy indexes Cg and Cgk. The identified deviations in measurements showed that the meter was not fully efficient. Consequently, actions were taken to ensuring that the measurement device is accurate.
References
Baráth, M., Žitňanský, J., Beloev, H.I. (2020). Influence of cutting speed to vibrations and roughness of machined surface during turning. Agricultural, forest and transport machinery and technologies, 7(1), 70-75.
Borovička, M., Janáč, A., Gӧrӧg, A. (2005). Metrology. Bratislava, Slovakia: STU. ISBN 80-227-2198-0
Bujna, M., Beloev, C.I. (2015). Tools of risk management in production processes. Ruse, Bulgaria: Angel Kanchev University of Ruse. ISBN 978-954-712-654-1.
Čech, J. - Pernikář, J. - Podaný, K. (2005). Industrial metrology. Brno, Czech Republic: Higher education technical in Brno. ISBN 80-214-3070-2.
Holub, M., Jankovych, R., Andrs, O., Kolibal, Z. (2018). Capability assessment of CNC machining centres as measuring devices. Measurement: Journal of the International Measurement Confederation, 118, 52-60. doi:10.1016/j.measurement.2018.01.00710.1016/j.measurement.2018.01.007
Kelemenová, T., Dovica, M. (2016). Calibration of meters. Košice, Slovakia: Technical University in Košice. ISBN 978-80-553-3069-3
Kuchtová, E. (2020). Analysis of the measurement system in selected organization. [Bachelor thesis], Nitra, Slovakia: Slovak University of Agriculture.
Paulová, I. (2013). Complex quality management. Bratislava, Slovakia: Iura Edition. ISBN 978-80-8078-574-1
Petrík, J. (2004). Metrology in quality management. Košice, Slovakia: Technical University in Košice. ISBN 80-8073-259-0
Polák, P., Poláková, Z., Žitňanský, J., Dostál, P., Kollárová, K. (2016). Improving the machining process by analysing the relationship between cutting force and temperature in drilling of engineering steels. Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 64(3), 855-861.10.11118/actaun201664030855
Turisová, R., Pačaiová, H. (2017). Production quality engineering. Košice, Slovakia: Technical University in Košice, Faculty of Engineering. ISBN 978-80-553-2656-6.
Vicario, G., Pennecchi, F. (2020). Special Section on Mathematical and Statistical Methods for Metrology. Measurement Science and Technology, 31(12), 120101.10.1088/1361-6501/ab9dc0
Žitňanský, J., Polák, P. (2019). Metrology in quality management. Nitra, Slovakia: Slovak University of Agriculture. ISBN 978-80-552-2072-7.
Downloads
Published
Issue
Section
How to Cite
Most read articles by the same author(s)
- Jan Radosław Kamiński, Maciej Kuboń, Irina Dmitrevna Ivanova, Andreev Viktorovich Sergutenko, The Analysis of the State Space of Management Process in the Industry Applying Expert Systems , Agricultural Engineering : Vol. 21 No. 2 (2017)
- Elżbieta Olech, Maciej Kuboń, Clients' Preferences and Development of Organic Food Distribution Channels , Agricultural Engineering : Vol. 20 No. 1 (2016)
- Iryna Hunko, Oleh Tsurkan, Serhiy Shargorodskiy, Taras Shchur, Hristo Beloev, Oleksandra Kovalyshyn, Marek Domin, The Influence of Wave Processes of Hydraulic Oils on the Operation of a Hydraulic Drive , Agricultural Engineering : Vol. 26 (2022)
- Aleksandr Viktorovich Klochkov, Vladimir Vladimirovich Gusarov, Maciej Kuboń, Jan Radosław Kamiński, Threshing and Grain Separating Mechanism with Differentiate Concave for Intensification of Threshing and Grain Separation , Agricultural Engineering : Vol. 21 No. 3 (2017)
- Urszula Malaga-Toboła, Sylwester Tabor, Dariusz Kwaśniewski, Maciej Kuboń, Production Capacity and Workstations Load in the Animal Feed Production Process , Agricultural Engineering : Vol. 20 No. 1 (2016)
- Peter Bajus, Miroslav Mraz, Ivan Rigo, Pavol Findura, Adam Fürstenzeller, Paweł Kiełbasa, Urszula Malaga-Tobola, The Influence of Drying Temperature and Moisture of Corn Seeds Planted on Their Damage , Agricultural Engineering : Vol. 23 No. 1 (2019)
- Maciej Sporysz, Maria Szczuka, Sylwester Tabor, Krzysztof Molenda, Maciej Kuboń, The Use of Cluster Analysis in Assessing the Sustainability of Organic Farms. Part I. Methodical Considerations , Agricultural Engineering : Vol. 23 No. 4 (2019)
- Vasul Salo, Valerii Pastukhov, Serhii Leshchenko, Taras Shchur, Oleg Dzhidzhora, Katarzyna Szwedziak, Stanisław Parafiniuk, Differentiation of the Composition of Combined Soil-Tillage Machines depending on the Conditions of Use , Agricultural Engineering : Vol. 28 (2024)
- Marián Bujna, Miroslav Prístavka, Chia Kuang Lee, Andrzej Borusiewicz, Waldemar Samociuk, Ivan Beloev, Urszula Malaga-Toboła, Reducing the Probability of Failure in Manufacturing Equipment by Quantitative FTA Analysis , Agricultural Engineering : Vol. 27 (2023)
- Stanislaw Derehajło, Magdalena Tymińska, Zbigniew Skibko, Andrzej Borusiewicz, Waclaw Romaniuk, Maciej Kuboń, Elżbieta Olech, Milan Koszel, Heavy Metal Content in Substrates in Agricultural Biogas Plants , Agricultural Engineering : Vol. 27 (2023)