Differentiation of the Composition of Combined Soil-Tillage Machines depending on the Conditions of Use
DOI:
https://doi.org/10.2478/agriceng-2024-0022Keywords:
differentiation, methodology, soil-tillage machines, working bodies, mathematical models, soil looseningAbstract
The authors propose an approach to complete a task that is important for agricultural production, while ensuring a specified quality index of soil cultivation with minimal energy and labor costs and maximum reduction of negative environmental impact on soil and the surrounding environment. This is done using combined machines with an optimal set of working bodies. Achieving this goal involves differentiating the composition of combined soil-tillage machines depending on their operating conditions based on a methodology that can be based on an algorithm for determining the overall quality index, mathematical models of the functioning of individual working bodies, and appropriate original software.
References
Abo Al-kheer, A., Eid, M., Aoues, Y., El-Hami, A.,Kharmanda, M. G., & Mouazen, A. M. (2011). Theoreticalanalysis of the spatial variability in tillage forces for fatigueanalysis of tillage machines. Journal of Terramechanics, 48(4), 285-295. https://doi.org/10.1016/j.jterra.2011.05.002
Abo Al-kheer, A., El-Hami, A., Kharmanda, M. G., & Mouazen, A. M. (2010). Reliability-based design for soil tillage machines. Journal of Terramechanics, 48(1), 57-64. https://doi.org/10.1016/j.jterra.2010.06.001.
Almaliki, S. (2018). Simulation of draft force for three types of plow using response surface method under various field conditions. The Iraqi Journal of Agricultural Sciences, 49(6), 1123-1124. https://doi.org/10.36103/ijas.v49i6.151.
Azimi-Nejadian, H., Karparvarfard, S. H., Naderi-Boldaji, M., & Rahmanian-Koushkaki, H. (2019). Combined finite element and statistical models for predicting force components on a cylindrical mouldboard plough. Biosystems Engineering, 186, 168-181. https://doi.org/10.1016/j.biosystemseng.2019.07.007.
Azizi, A., Gilandeh, Y. A., Mesri-Gundoshmian, T., Saleh-Bigdeli, A. A., & Moghaddam, H. A. (2020). Classification of soil aggregates: A novel approach based on deep learning. Soil and Tillage Research, 199, 104586. https://doi.org/10.1016/j.still.2020.104586.
Celik, H. K., Caglayan, N., Topakci, M., Rennie, A. E. W., & Akinci, I. (2020). Strength-based design analysis of a Para-Plow tillage tool. Computers and Electronics in Agriculture, 169, 105168. https://doi.org/10.1016/j.compag.2019.105168.
Chirende, B., Li, J. Q., & Vheremu, W. (2019). Application of finite element analysis in modeling of bionic harrowing discs. Biomimetics, 4(3), 61. https://doi.org/10.3390/biomimetics4030061.
Ebrahimi, R., Mirdamadi, H. R., & Ziaei-Rad, S. (2018). Operational modal analysis and fatigue life estimation of a chisel plow arm under soil-induced random excitations. Measurement, 116, 451-457. https://doi.org/10.1016/j.measurement.2017.11.020.
He, C., You, Y., Wang, D., & Wu, H. (2018). Estimating soil failure due to torsion via vane shear test by varying vane diameter and soil properties. Soil and Tillage Research, 177, 68-78. https://doi.org/10.1016/j.still.2017.12.004.
Jiang, X., Tong, J., Ma, Y., & Sun, J. (2020). Development and verification of a mathematical model for the specific resistance of a curved subsoiler. Biosystems Engineering, 190, 107-119. https://doi.org/10.1016/j.biosystemseng.2019.12.004.
Jirigalantu, Li, X., Mi, X., Liu, K., & Tang, Y. (2017). Development of a parameterized mechanical model of a chisel-edge grating ruling tool. Precision Engineering, 50, 388-392. https://doi.org/10.1016/j.precisioneng.2017.06.013
Karaiev O., Bondarenko L., Halko S., Miroshnyk O., Vershkov O., Karaieva T., Shchur T Findura P.,& Prístavka M. (2021). Mathematical modelling of the fruit-stone culture seeds calibration process using flat sieves. Acta Technologica Agriculturae, 24(3), 119-123. https://doi.org/10.2478/ata-2021-0020
Leschenko, S. (2014). Experimental estimate of the efficiency of basic tilling by chisel equipment in the conditions of soil. In Design, production and operation of agricultural machines. All-state interdepartmental scientific and technical collection. Eds Sergey Leschenko, Vasil Salo, Dmitry Petrenko. Kirovohrad, UA.
Leshchenko, S., Salo, V., Vasylkovskyy, A. (2014). Situation and prospect of intensifying the work of chisel tools to preserve the natural fertility. MOTROL, 16(2), 195-201.
Lezhenkin O., Halko, S., Miroshnyk O., Vershkov O., Lezhenkin I., Suprun O., Shchur T., Kruszelnicka W., & Kasner, R. (2021). Investigation of the separation of combed heap of winter wheat. Journal of Physics: Conference Series, 1781(1), 012016. https://doi.org/10.1088/1742-6596/1781/1/012016.
Prem, M., Swarnkar, R., Kantilal, V. D. K., Jeetsinh, P. S. K., & Chitharbhai, K. B. (2016). Combined tillage tools-a review. Current Agriculture Research Journal, 4(2), 179. http://dx.doi.org/10.12944/CARJ.4.2.07.
Ranjbar, I., Rashidi, M., Najjarzadeh, I., Niazkhani, A., & Niyazadeh, M. (2013). Modeling of moldboard plow draft force based on tillage depth and operation speed. Middle-East Journal of Scientific Research, 17(7), 891-897. https://doi.org/10.5829/idosi.mejsr.2013.17.07.12232.
Renon, N., Montmitonnet, P., & Laborde, P. (2005). Numerical formulation for solving soil/tool interaction problem involving large deformation. Engineering Computations, 22(1), 87-109. https://doi.org/10.1108/02644400510572424
Van Capelle C., Schrader S., & Brunotte J. (2012). Tillage-induced changes in the functional diversity of soil biota – A review with a focus on Germandata. European Journal of Soil Biology, 50, 165–181.
Vasylkovska K.V., Leshchenko S.M., Vasylkovskyi O.M., & Petrenko D.I. (2016) Improvement of equipment for basic tillage and sowing as initial stage of harvest forecasting. INMATEH – Agricultural Engineering, 50(3), 13-20.
Zeng, Z., Chen, Y., & Zhang, X. (2017). Modelling the interaction of a deep tillage tool with heterogeneous soil. Computers and Electronics in Agriculture, 143, 130-138. https://doi.org/10.1016/J.COMPAG.2017.10.005.
Zeng, Z., Ma, X., Chen, Y., & Qi, L. (2020). Modelling residue incorporation of selected chisel ploughing tools using the discrete element method (DEM). Soil and Tillage Research, 197, 104505. https://doi.org/10.1016/j.still.2019.104505.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Vasul Salo et al., published by Sciendo
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Katarzyna Szwedziak, Ewa Polańczyk, Statistical Analysis of Common Mushroom Yielding from Cultivation Integrated with Preparations Containing Beneficial Microorganisms , Agricultural Engineering : Vol. 22 No. 3 (2018)
- Miroslav Prístavka, Pavol Findura, Ivan Beloev, Maciej Kuboń, Veronika Hrdá, Stepan Kovalyshyn, Taras Shchur, Verification of the Measurement System in a Production Organization , Agricultural Engineering : Vol. 26 (2022)
- Stanisław Parafiniuk, Marek Milanowski, Anna Krawczuk, Józef Sawa, Alaa Kamel Subr, Evaluation of Flat Fan Nozzles Operating Parameters Under Conditions of Accelerated Boundary and Destructive Wear , Agricultural Engineering : Vol. 22 No. 4 (2018)
- Marek Milanowski, Alaa Subr, Stanisław Parafiniuk, Monika Różańska-Boczula, The Effect of Adjuvant Concentration on Changes of Spray Characteristics and Spraying Parameters for Selected Types of Nozzles , Agricultural Engineering : Vol. 26 (2022)
- Katarzyna Szwedziak, Ewa Polańczyk, Statistical Modelling of the Number of Infected Fruiting Bodies of Common Mushrooms in Cultivation Integrated with Preparations Containing Beneficial Microorganisms , Agricultural Engineering : Vol. 22 No. 3 (2018)
- Katarzyna Szwedziak, Petr Dolezal, Sylwester Tabor, Jacek Ogrodniczek, Electrotechnical Tools and Computer Image Analysis in Assessing the Quality of Maize Grain During Storage , Agricultural Engineering : Vol. 27 (2023)
- Vadym Bredykhin, Stanislav Tikunov, Maksym Slipchenko, Oleksiy Alfyorov, Alexey Bogomolov, Taras Shchur, Sławomir Kocira, Piotr Kiczorowski, Rostysav Paslavskyy, Improving Efficiency of Corn Seed Separation and Calibration Process , Agricultural Engineering : Vol. 27 (2023)
- Volodymyr Nadykto, Sergey Kiurchev, Tatiana Chorna, Taras Hutsol, Krzysztof Mudryk, Szymon Głowacki, Anatoliy Rud, Alona Shevtsova, Igor Ryabov, Katarzyna Szwedziak, Experimental Studies on the Operation of Agricultural Crops Mowing Unit with Simultaneous Chopping and Incorporation of Stubble Into the Soil , Agricultural Engineering : Vol. 27 (2023)
- Vadym Bredykhin, Taras Shchur, Liliia Kis-Korkishchenko, Serhii Denisenko, Serhii Ivashchenko, Andrzej Marczuk, Oleg Dzhidzhora, Maciej Kubon, Determination of Ways of Improving the Process of Separation of Seed Materials on the Working Surface of the Pneumatic Sorting Table , Agricultural Engineering : Vol. 28 (2024)