Windrow Scarifier for Rotary Mower
DOI:
https://doi.org/10.1515/agriceng-2016-0052Keywords:
rotary mower, windrow scarifier, drums, screw areas, researchAbstract
In order to accelerate the process of drying of grass mowed for hay and haylage there are numerous technological treatments: multiple tedding, raking in rolls and turning rolls, mechanical impact on green forage in the process of mowing by the use of presses and windrow scarifiers. Presently mechanical maceration of green forage with mowing is popular. Papilionaceous feed plants are subjected to windrow presses and graminacenous plants to beating working systems. Analysis of various devices for acceleration of the drying process of green forage proves that they are quite complex and expensive on account of considerable material consumption. In order to eliminate the faults in the Russian Scientific and Research Fodder Institute of Wiliams a completely different windrow scarifier for the rotary mower KR-2.4 M was developed. It has a simple structure and it serves for acceleration of field drying of mowed grass in loose rolls. The paper presents the results of the research on a mower with an experimental windrow scarifier
Downloads
Published
2016-10-17
Issue
Section
Articles
How to Cite
Windrow Scarifier for Rotary Mower. (2016). Agricultural Engineering , 20(3), 145–151. https://doi.org/10.1515/agriceng-2016-0052
Most read articles by the same author(s)
- Jan Barwicki, Maciej Kuboń, Andrzej Marczuk, New Developments of Solar Energy Utilization in the Aspect of EU Directives , Agricultural Engineering : Vol. 21 No. 2 (2017)
- I.S. Kruk, O.V. Gordeenko, T.P. Kot, Andrzej Marczuk, Jan Kamiński, Maciej Kuboń, Determination of Optimal Geometric Parameters of the Windshield Device Limiting the Spray Drift by Wind in Herbicides Spraying , Agricultural Engineering : Vol. 20 No. 1 (2016)
- Jan Barwicki, Maciej Kuboń, Andrzej Marczuk, Development of New Technologies for Cattle Breeding Systems Taking Into Account Sustainable Environmental Conditions , Agricultural Engineering : Vol. 22 No. 2 (2018)
- Tadeusz Głuski, Magdalena Patro, Andrzej Marczuk, Wojciech Misztal, Katarzyna Szwedziak, Żaneta Grzywacz, 24-Hour Microclimate Conditions in Livestock Building , Agricultural Engineering : Vol. 23 No. 3 (2019)
- Mariusz Walczak, Jacek Caban, Andrzej Marczuk, Evaluation of Tribological Properties of Polymer Materials Used for Sliding Bearings in Agricultural Machinery , Agricultural Engineering : Vol. 21 No. 1 (2017)
- Waclaw Romaniuk, Victor Polishсhuk, Andrzej Marczuk, Liudmyla Titovab, Ivan Rogovskii, Kinga Borek, Impact of Sediment Formed in Biogas Production on Productivity of Crops and Ecologic Character of Production of Onion for Chives , Agricultural Engineering : Vol. 22 No. 1 (2018)
- Wacław Romaniuk, Tetyana Zheliezna, Semen Drahniev, Anatoliy Bashtovyi, Henryk Sobczuk, Andrzej Marczuk, Liudmyla Titova, Ivan Rogovskii, Kinga Borek, Prospects for Production and Consumption of Second Generation Biofuels in Ukraine , Agricultural Engineering : Vol. 22 No. 4 (2018)
- Nikolaj Perepravo, Vladimir Zolotarev, Aleksej Ševcov, Jurij Ahlamov, Sergej Otroško, Nikolaj Šarikov, Vladimir Kosolapov, Andrzej Marczuk, Jacek Caban, Improvement of Harvesting Methods of Perennial Seed Grass , Agricultural Engineering : Vol. 20 No. 4 (2016)
- Vadym Bredykhin, Taras Shchur, Liliia Kis-Korkishchenko, Serhii Denisenko, Serhii Ivashchenko, Andrzej Marczuk, Oleg Dzhidzhora, Maciej Kubon, Determination of Ways of Improving the Process of Separation of Seed Materials on the Working Surface of the Pneumatic Sorting Table , Agricultural Engineering : Vol. 28 (2024)