Evaluation of Tribological Properties of Polymer Materials Used for Sliding Bearings in Agricultural Machinery
Keywords:
friction coefficient, sliding bearings, ball-on-disc test, wear, tribologyAbstract
The continuous technological development requires the use of modern materials also in agricultural engineering. Knowledge of the characteristics of tribological materials pairs cooperating with each other is useful for developing sliding nodes of agricultural machinery. Tribological properties of materials should be assessed for selection of technological materials beyond the economic criterion. The article presents analysis of the characteristics of tribological ball-on-disc wear of polymeric materials used as sliding elements for farm machines. Tribological tests were carried out under dry friction for a polymer-metal pair, and a wear rate and friction coefficient of the sample; the signs of wear were submitted to SEM observations.
Downloads
Published
2017-02-09
Issue
Section
Articles
How to Cite
Evaluation of Tribological Properties of Polymer Materials Used for Sliding Bearings in Agricultural Machinery. (2017). Agricultural Engineering , 21(1), 95-103. https://ojs.agriceng.org/index.php/AgricEng/article/view/20
Most read articles by the same author(s)
- Jan Barwicki, Maciej Kuboń, Andrzej Marczuk, New Developments of Solar Energy Utilization in the Aspect of EU Directives , Agricultural Engineering : Vol. 21 No. 2 (2017)
- I.S. Kruk, O.V. Gordeenko, T.P. Kot, Andrzej Marczuk, Jan Kamiński, Maciej Kuboń, Determination of Optimal Geometric Parameters of the Windshield Device Limiting the Spray Drift by Wind in Herbicides Spraying , Agricultural Engineering : Vol. 20 No. 1 (2016)
- Jan Barwicki, Maciej Kuboń, Andrzej Marczuk, Development of New Technologies for Cattle Breeding Systems Taking Into Account Sustainable Environmental Conditions , Agricultural Engineering : Vol. 22 No. 2 (2018)
- Tadeusz Głuski, Magdalena Patro, Andrzej Marczuk, Wojciech Misztal, Katarzyna Szwedziak, Żaneta Grzywacz, 24-Hour Microclimate Conditions in Livestock Building , Agricultural Engineering : Vol. 23 No. 3 (2019)
- Jarosław Paszkowski, Maciej Domański, Jacek Caban, Janusz Zarajczyk, Miroslav Pristavka, Pavol Findura, The Use of Refuse Derived Fuel (RDF) in the Power Industry , Agricultural Engineering : Vol. 24 No. 3 (2020)
- Waclaw Romaniuk, Victor Polishсhuk, Andrzej Marczuk, Liudmyla Titovab, Ivan Rogovskii, Kinga Borek, Impact of Sediment Formed in Biogas Production on Productivity of Crops and Ecologic Character of Production of Onion for Chives , Agricultural Engineering : Vol. 22 No. 1 (2018)
- Wacław Romaniuk, Tetyana Zheliezna, Semen Drahniev, Anatoliy Bashtovyi, Henryk Sobczuk, Andrzej Marczuk, Liudmyla Titova, Ivan Rogovskii, Kinga Borek, Prospects for Production and Consumption of Second Generation Biofuels in Ukraine , Agricultural Engineering : Vol. 22 No. 4 (2018)
- Aleksej Ševcov, Sergej Otroško, Jurij Ahlamov, Vladimir Kosolapov, Andrzej Marczuk, Wojciech Misztal, Andrzej Turski, Windrow Scarifier for Rotary Mower , Agricultural Engineering : Vol. 20 No. 3 (2016)
- Nikolaj Perepravo, Vladimir Zolotarev, Aleksej Ševcov, Jurij Ahlamov, Sergej Otroško, Nikolaj Šarikov, Vladimir Kosolapov, Andrzej Marczuk, Jacek Caban, Improvement of Harvesting Methods of Perennial Seed Grass , Agricultural Engineering : Vol. 20 No. 4 (2016)
- Vadym Bredykhin, Taras Shchur, Liliia Kis-Korkishchenko, Serhii Denisenko, Serhii Ivashchenko, Andrzej Marczuk, Oleg Dzhidzhora, Maciej Kubon, Determination of Ways of Improving the Process of Separation of Seed Materials on the Working Surface of the Pneumatic Sorting Table , Agricultural Engineering : Vol. 28 (2024)