Modelling Wheat Grain Flow During Sowing Based on the Model of Grain with Shifted Center of Gravity
DOI:
https://doi.org/10.2478/agriceng-2022-0003Keywords:
germ, grain model, impact of orientation, seed orientation, winter wheatAbstract
Winter wheat is one of the widespread crops in Ukraine. The search for methods to increase the yield and consumer properties of wheat, without compromising environmental safety, is one of the important scientific problems. The principles of precision agriculture point to the proper positioning of the seeds, recommending the method of “upward germination” (positioning the wheat germ vertically). The main objective of this study was to develop a new geometric model of wheat grain with a displaced centre of mass, as well as to conduct the theoretical research and numerical experiments on the orientation of grains using their multiple impact interaction with inclined surfaces. A new model of germ consisting of two different end semispheres and amid-line truncated cone was proposed, with a displaced centre of mass. Taking into account the physical properties of the objects, the concept of arrangement of gravity orientation of seeds in a stream was applied. This concept was based on various ratios of kinetic parameters of bodies with a displaced centre of gravity following an impact. The results showed that the orientation process can be controlled by changing the inclination angles and the length of the walls of the tray orientator within the working velocity range. This must be done before impact interaction of 0.2-0.3 m s−1 when the inclination angles of the impact interaction planes are 24-32°C.
References
Boothroyd, G., Dewhurst, P. (2002). Product Design for Manufacture and Assembly. New York: Marcell Dekker, Inc. ISBN: 0-8247-0584-X
Borger, C., Hashem, A., Pathan, S. (2010). Manipulating crop row orientation to suppress weeds and increase crop yield. Weed Science, 58(2), 174–178. doi: 10.1614/WS-09-094.110.1614/WS-09-094.1
Bozhydarnik, V.V., Ghryghor’jeva, N.S., Shabajkovych, V. A. (2005). Automation of assembly of products. Lutsk: LDTU. (In Ukrainian).
Chenu, K., Porter, J., Martre, P., Basso, B., Chapman, S., Ewert, F., Bindi, M., Asseng, S. (2017). Contribution of crop models to adaptation in wheat. Trends in plant science, 22(6), 472–490. doi: 10.1016/j.tplants.2017.02.00310.1016/j.tplants.2017.02.00328389147
Chu, P., Zhang, Y., Yu, Z., Guo, Z., Shi, Y. (2016). Winter wheat grain yield, water use, biomass accumulation and remobilisation under tillage in the North China Plain. Field Crops Research, 193, 43–53. doi: 10.1016/j.fcr.2016.03.00510.1016/j.fcr.2016.03.005
Dai, J., Wang, Z., Li, M., He, G., Li, Q., Cao, H., Wang, S., Gao, Y., Hui, X. (2016). Winter wheat grain yield and summer nitrate leaching: Long-term effects of nitrogen and phosphorus rates on the Loess Plateau of China. Field Crops Research, 196, 180–190. doi: 10.1016/j.fcr.2016.06.02010.1016/j.fcr.2016.06.020
Dyakonov A.A., Shipulin L.V. (2016). Wheel–workpiece interaction in peripheral surface grinding. Russian Engineering Research, 36, 63-66. https://doi.org/10.3103/S1068798X1601009310.3103/S1068798X16010093
Grishchenko, N.V., Roslyakov, V.S. (2009). The method of sowing corn and sowing apparatus for its implementation. Patent RF, no. 2343668. (In Russian).
Gusev, A.A. (1976). Automation and mechanization of assembly processes in small-scale and serial production. Moscow. (In Russian).
Koller, A., Taylor, R., Raun, W., Weckler, P., Buser, M. (2016). Modelling and validation of maize seed orientation by pushing. Biosystems Engineering, 151, 338–349. doi: 10.1016/j.biosystemseng.2016.09.01110.1016/j.biosystemseng.2016.09.011
Kouamé, K., Bernard, K., Kouakou, K., Kouassi, K., Jean-Pierre, B., Bi Irié, Z., Arsène, I. (2015). Effects of Seed orientation and sowing depths on Germination, Seedling vigor and yield in Oleaginous type of Bottle gourd, Lagenaria siceraria (Molina Standl). International Research Journal of Biological Sciences, 4(12), 46–53. 2278-3202. ISSN 2278-3202
Kuzina, T., Sirenko, V., Zubko, V., Chuba, V. (2018). Increasing yields of winter wheat by means of sowing orientation of grain Proceedings of the 17th International Scientific Conference Engineering for rural development, 687–694. doi: 10.22616/ERDev2018.17.N38710.22616/ERDev2018.17.N387
Lapshin, V.V. (2014). Planar problem elastic impact a body against an obstacle. Engineering Journal: Science and Innovation (electronic journal), 1(25). Available at: http://engjournal.ru/catalog/eng/teormech/1195.html [accessed 05.03.2014]
Lebedovskiy, M.S., Veyts, V.L., Fedotov, A.I. (1985). Scientific basis of automatic assembly. Leningrad. (In Russian).
Maiatskaia, I.A. (1999). Development of mechanical-mathematical models of seeds of agricultural crops harvested by combines (PhD Thesis), Rostov-on-Don: Rostov-on-Don State Academy of Agricultural Engineering. (In Russian).
Polukoshko, S., Kononova, О., Sokolova, S. (2015). Gravity–operated impact feeder dynamics. Proceedings of the 7th International Scientific and Practical Conference. Environment. Technology. Resources, 214–221. doi: 10.17770/etr2009vol2.1042.10.17770/etr2009vol2.1042
Redford, A., Chal, J. (1994). Design for Assembly: Principles and Practice Publisher: McGraw-Hill. ISBN-10: 0077078381.
Schillinger, W., Donaldson, E., Allan, R., Jones, S. (1998). Winter Wheat Seedling Emergence from Deep Sowing Depths. Agronomy Journal, 90(5). doi: 10.2134/agronj1998.00021962009000050 002x
Suri, R. (1995). Design and Analysis of Manufacturing Systems. University of Wisconsin.
Torres, G., Koller, A., Taylor, R., Raun, W. (2017). Seed-oriented planting improves light interception, radiation use efficiency and grain yield of maize (Zea mays L.). Experimental Agriculture, 53(2), 210–225. doi:10.1017/S001447971600032610.1017/S0014479716000326
Troshkin, D., Chertov, A., Gorbunova, E., Baranov, I., Mironova, D., Kushkoeva, A., Zuev, E., Loskutov, I. (2019). A study of the influence of the orientation and arrangement features of wheat grains and their color on determination of the vitreousity. Automated Visual Inspection and Machine Vision III, 110610K. doi: 10.1117/12.252601810.1117/12.2526018
Uniyal, A., Singh, B., Todaria, N. (2007). Effects of Seed Size, Sowing Orientation and Depth on Germination and Seedling Growth in Neem, Azadirachta indica. Seed Technology, 29(1), 68–75.
Vladzievskiy, A.P., Belousov, A.P. (1966). Fundamentals of automation and mechanization of technological processes in mechanical engineering. Moscow: Vysshaya shkola. (In Russian).
Zavgorodniy, A.I., Romanyuk, G.S., Sheptur, A.A., Obykhvost, A.V. (2010). Ensuring the technological mode of movement of the spherical particle on the vibroseparator deck. Mechanization of agricultural production: Bulletin of the Kharkiv National Technical University of Agriculture named after Peter Vasylenko, 1(93), 205–214.
Zotikov, A.S., Lashkov, V.A. (2014). Restitution coefficient of velocity at impact of absolutely elastic particle with shape of an ellipsoid of revolution. Bulletin of st. Petersburg state university. Series 1. Mathematics. Mechanics. Astronomy, 1(59), 245–253.
Zubko, V.M., Sirenko, V.F., Plavinsky, V.I., Kuzina, T.V. (2017a). Grain-sowing device. Patent UA, no. 113823. (In Ukrainian).
Zubko, V.M., Sirenko, V.F., Plavinsky, V.I., Kuzina, T.V. (2017b). Method of placement of winter wheat seeds in the soil under sowing. Patent UA, no. 113837. (In Ukrainian).
Downloads
Published
Issue
Section
How to Cite
Most read articles by the same author(s)
- Andrii Voitik, Vasyl Kravchenko, Olexandr Pushka, Tetyana Kutkovetska, Taras Shchur, Sławomir Kocira, Comparison of NDVI, NDRE, MSAVI and NDSI Indices for Early Diagnosis of Crop Problems , Agricultural Engineering : Vol. 27 (2023)
- Iryna Hunko, Oleh Tsurkan, Serhiy Shargorodskiy, Taras Shchur, Hristo Beloev, Oleksandra Kovalyshyn, Marek Domin, The Influence of Wave Processes of Hydraulic Oils on the Operation of a Hydraulic Drive , Agricultural Engineering : Vol. 26 (2022)
- Edmund Lorencowicz, Milan Koszel, Sławomir Kocira, Jacek Uziak, Changes in the Use of It Technologies by Students of Agricultural Faculties , Agricultural Engineering : Vol. 21 No. 1 (2017)
- Artur Przywara, Milan Koszel, Anna Krawczuk, Alexandros Sotirios Anifantis, The Analysis of the New Farm Tractors Market in Poland in 2010-2020 in the Context of Income Generated by Farmers’ Households , Agricultural Engineering : Vol. 26 (2022)
- Magdalena Kachel, Arkadiusz Matwijczuk, Artur Przywara, Artur Kraszkiewicz, Milan Koszel, Profile of Fatty Acids and Spectroscopic Characteristics of Selected Vegetable Oils Extracted by Cold Maceration , Agricultural Engineering : Vol. 22 No. 1 (2018)
- Miroslav Prístavka, Pavol Findura, Ivan Beloev, Maciej Kuboń, Veronika Hrdá, Stepan Kovalyshyn, Taras Shchur, Verification of the Measurement System in a Production Organization , Agricultural Engineering : Vol. 26 (2022)
- Vadym Bredykhin, Stanislav Tikunov, Maksym Slipchenko, Oleksiy Alfyorov, Alexey Bogomolov, Taras Shchur, Sławomir Kocira, Piotr Kiczorowski, Rostysav Paslavskyy, Improving Efficiency of Corn Seed Separation and Calibration Process , Agricultural Engineering : Vol. 27 (2023)
- Stanislaw Derehajło, Magdalena Tymińska, Zbigniew Skibko, Andrzej Borusiewicz, Waclaw Romaniuk, Maciej Kuboń, Elżbieta Olech, Milan Koszel, Heavy Metal Content in Substrates in Agricultural Biogas Plants , Agricultural Engineering : Vol. 27 (2023)
- Vadym Bredykhin, Taras Shchur, Liliia Kis-Korkishchenko, Serhii Denisenko, Serhii Ivashchenko, Andrzej Marczuk, Oleg Dzhidzhora, Maciej Kubon, Determination of Ways of Improving the Process of Separation of Seed Materials on the Working Surface of the Pneumatic Sorting Table , Agricultural Engineering : Vol. 28 (2024)
- Vasul Salo, Valerii Pastukhov, Serhii Leshchenko, Taras Shchur, Oleg Dzhidzhora, Katarzyna Szwedziak, Stanisław Parafiniuk, Differentiation of the Composition of Combined Soil-Tillage Machines depending on the Conditions of Use , Agricultural Engineering : Vol. 28 (2024)