The Influence of Wave Processes of Hydraulic Oils on the Operation of a Hydraulic Drive
DOI:
https://doi.org/10.2478/agriceng-2022-0008Keywords:
hydraulic drives, mathematical modeling, Runge-Kutta-Feldberg method, wave processesAbstract
The paper reviews the state of research of wave processes in hydraulic systems of machines, and their impact on the quality and stability of hydraulic drives. As noted in the works of previous researchers, these phenomena occur in hydraulic systems and adversely affect the quality and stability of their work, significantly reducing reliability. The method of construction of mathematical models is offered. A mathematical model of the hydraulic system with two series-connected hydraulic motors is built, taking into account transients. The Runge-Kutta-Feldberg method with automatic change of the integration step was used to solve this model. The application of this method makes it possible to estimate the amplitude and frequency of the pressure wave in real time for each part of the pipeline. As a result of the analysis of the obtained transients it was concluded that at the length of the pressure line in a group hydraulic drive with 2 series-connected hydraulic motors up to 1.5 m, wave processes do not significantly affect the system and in the mathematical model they can be ignored. With the length of the pressure line from 1.5 m to 9 m, the wave processes in the cavity do not affect the stability of the system, although significantly impair the quality of its work. Hydraulic systems with a pressure line length of more than 9 m are not recommended for implementation, because the wave processes in the cavity lead to vibrations and noise in the hydraulic system and require additional measures to eliminate the impact of this phenomenon.
References
Karaiev, O., Bondarenko, L., Halko, S., Miroshnyk, O., Vershkov, O., Karaieva, T., Shchur, T., Findura, P., Prístavka, M. (2021). Mathematical modelling of the fruit-stone culture seeds calibration process using flat sieves. Acta Technologica Agriculturae, 24(3), 119-123.10.2478/ata-2021-0020
Havrylenko, Y., Kholodniak, Y., Halko, S., Vershkov, O., Miroshnyk, O., Suprun, O., Dereza, O., Shchur, T., Śrutek, M. (2021a). Representation of a monotone curve by a contour with regular change in curvature. Entropy, 23(7), 923.10.3390/e23070923830598034356464
Havrylenko Y., Kholodniak Y., Halko S., Vershkov O., Bondarenko L., Suprun O., Miroshnyk, O., Shchur T., Śrutek M., Gackowska M. (2021b). Interpolation with specified error of a point series belonging to a monotone curve. Entropy, 23(5), 493.10.3390/e23050493814299833919030
Khasawneh A., Qawaqzeh, M., Kuchanskyy, V., Rubanenko, O., Miroshnyk, O., Shchur, T., Drechny, M., (2021). Optimal determination method of the transposition steps of an extra high voltage power transmission line. Energies, 14(20), 6791.10.3390/en14206791
Mannheim, V., Simenfalvi, Z. (2020). Total Life Cycle of Polypropylene Products: Reducing Environmental Impacts in the Manufacturing Phase. Polymers, 12, 1901.10.3390/polym12091901756310432846916
Maxit, L., Karimi, M., Guasch, O. (2021). Spatial Coherence of Pipe Vibrations Induced by an Internal Turbulent Flow. Journal of Sound and Vibration, 493, 115841.10.1016/j.jsv.2020.115841
Ivanov, M.I., Rutkevych, V.S., Kolisnyk, O.M., Lisovoy, I.O. (2019). Research on the block-portion separator parameters influence on the adjustment range of operating elements speed. INMATEH - Agricultural Engineering, 57, 37-44.10.35633/INMATEH_57_04
Panchenko, A., Voloshina, A., Boltyansky, O., Milaeva, I., Grechka, I., Khovanskyy, S., Svynarenko, M., Glibko, O., Maksimova, M., Paranyak, N. (2018a). Designing the Flow-through Parts of Distribution Systems for the PRG Series Planetary Hydraulic Motors. Eastern-European Journal of Enterprise Technologies, 3, 67-77.10.15587/1729-4061.2018.132504
Chang, Y.J., Kim, J.H., Jeon, C.H., Kim, C., Jung, S.Y. (2006). Development of an Integrated System for the Automated Design of a Gerotor Oil Pump. Journal of Mechanical Design, 129, 1099-1105.10.1115/1.2757629
Choi, T.H., Kim, M.S., Lee, G.S., Jung, S.Y., Bae, J.H., Kim, C. (2012). Design of Rotor for Internal Gear Pump Using Cycloid and Circular-Arc Curves. Journal of Mechanical Design, 134, 011005.10.1115/1.4004423
Stryczek, J., Bednarczyk, S., Biernacki, K. (2014a). Gerotor Pump with POM Gears: Design, Production Technology. Archives of Civil and Mechanical Engineering, 14, 391-397.10.1016/j.acme.2013.12.008
Gamez-Montero, P.J., Garcia-Vilchez, M., Raush, G., Freire, J., Codina, E. (2012). Teeth Clearance and Relief Grooves Effects in a Trochoidal-Gear Pump Using New Modules of GeroLAB. Journal of Mechanical Design, 134, 054502.10.1115/1.4006440
Furustig, J., Almqvist, A., Bates, C.A., Ennemark, P., Larsson, R.A. (2015). Two Scale Mixed Lubrication Wearing-in Model, Applied to Hydraulic Motors. Tribology International, 90, 248-256.10.1016/j.triboint.2015.04.033
Stryczek, J., Bednarczyk, S., Biernacki, K. (2014b). Strength Analysis of the Polyoxymethylene Cycloidal Gears of the Gerotor Pump. Archives of Civil and mechanical Engineering, 14(4), 647-660.10.1016/j.acme.2013.12.005
Gunko, I.V. (1998). Matematychna Model Hrupovoho Hidropryvodu z Dvoma Hidromotoramy. Visnyk Vinnytskoho Politekh Instytutu, 2, 97-100.
Panchenko, A., Voloshina, A., Milaeva, I., Panchenko, I., Titova, O. (2018). The Influence of the Form Error after Rotor Manufacturing on the Output Characteristics of an Orbital Hydraulic Motor. International Journal of Engineering & Technology, 7, 1-5.10.14419/ijet.v7i4.3.19542
Zhao, X., Ning, D., Göteman, M., Kang, H. (2017). Effect of the PTO Damping Force on the Wave Pressures on a 2-D Wave Energy Converter. Journal of Hydrodynamics, Ser. B, 29, 863-870.10.1016/S1001-6058(16)60798-9
Zhang, L., Tijsseling, S.A., Vardy, E.A. (1999). FSI Analysis of Liquid-Filled Pipes. Journal of Sound and Vibration, 224(1), 69-99.10.1006/jsvi.1999.2158
Zhang, Zh. (2019). Wave Tracking Method of Hydraulic Transients in Pipe Systems with Pump Shut-off under Simultaneous Closing of Spherical Valves. Renewable Energy, 132, 157-166.10.1016/j.renene.2018.07.119
Gao, P., Yu, T., Zhang, Y., Wang, J., Zhai, J. (2021). Vibration Analysis and Control Technologies of Hydraulic Pipeline System in Aircraft: A Review. Chinese Journal of Aeronautics, 34(4), 83-114.10.1016/j.cja.2020.07.007
Zecchin, A.C., Gong, J., Simpson, A.R., Lambert, M.F. (2014). Condition Assessment in Hydraulically Noisy Pipeline Systems Using a Pressure Wave Splitting Method. Procedia Engineering, 89, 1336-1342.10.1016/j.proeng.2014.11.452
Gao, P., Yu, T., Zhang, Y., Wang, J., Zhai, J. (2021). Vibration Analysis and Control Technologies of Hydraulic Pipeline System in Aircraft: A Review. Chinese Journal of Aeronautics, 34, 83-114.10.1016/j.cja.2020.07.007
Downloads
Published
Issue
Section
How to Cite
Most read articles by the same author(s)
- Marek Domin, Magdalena Ćwiklińska, Małgorzata Góral-Kowalczyk, Reeze-Drying Impact on Hardness of Selected Soft Fruit Liophilisates , Agricultural Engineering : Vol. 25 (2021)
- Vladislav Zubko, Viktor Sirenko, Tetiana Kuzina, Viktor Onychko, Serhii Sokolik, Hynek Roubik, Milan Koszel, Taras Shchur, Modelling Wheat Grain Flow During Sowing Based on the Model of Grain with Shifted Center of Gravity , Agricultural Engineering : Vol. 26 (2022)
- Andrii Voitik, Vasyl Kravchenko, Olexandr Pushka, Tetyana Kutkovetska, Taras Shchur, Sławomir Kocira, Comparison of NDVI, NDRE, MSAVI and NDSI Indices for Early Diagnosis of Crop Problems , Agricultural Engineering : Vol. 27 (2023)
- Miroslav Prístavka, Pavol Findura, Ivan Beloev, Maciej Kuboń, Veronika Hrdá, Stepan Kovalyshyn, Taras Shchur, Verification of the Measurement System in a Production Organization , Agricultural Engineering : Vol. 26 (2022)
- Vadym Bredykhin, Stanislav Tikunov, Maksym Slipchenko, Oleksiy Alfyorov, Alexey Bogomolov, Taras Shchur, Sławomir Kocira, Piotr Kiczorowski, Rostysav Paslavskyy, Improving Efficiency of Corn Seed Separation and Calibration Process , Agricultural Engineering : Vol. 27 (2023)
- Vadym Bredykhin, Taras Shchur, Liliia Kis-Korkishchenko, Serhii Denisenko, Serhii Ivashchenko, Andrzej Marczuk, Oleg Dzhidzhora, Maciej Kubon, Determination of Ways of Improving the Process of Separation of Seed Materials on the Working Surface of the Pneumatic Sorting Table , Agricultural Engineering : Vol. 28 (2024)
- Leszek Rydzak, Kostiantyn Vasiukov, Tomasz Guz, Marek Domin, Stepan Kovalyshyn, Piotr Kiczorowski, Effect of the Addition of Selected Unmalted Raw Materials to Barley Malt on Selected Parameters of Malt Extracts , Agricultural Engineering : Vol. 28 (2024)
- Vasul Salo, Valerii Pastukhov, Serhii Leshchenko, Taras Shchur, Oleg Dzhidzhora, Katarzyna Szwedziak, Stanisław Parafiniuk, Differentiation of the Composition of Combined Soil-Tillage Machines depending on the Conditions of Use , Agricultural Engineering : Vol. 28 (2024)