Improving Efficiency of Corn Seed Separation and Calibration Process
DOI:
https://doi.org/10.2478/agriceng-2023-0018Keywords:
calibration process, seed material, separating machine, sieve, separator performance, open areaAbstract
The paper analyzes the existing theoretical research of corn seed separation and calibration processes. The machines, tools and equipment that implement the process were studied. An innovative sieve with openings in the Cassini oval shape was proposed for the economical separation and calibration of corn seeds. The results of operation of the proposed sieve in the operating conditions of Kharkiv Feed Mill on BSH-100 serial separators were considered. The study of the effectiveness of sifting corn seeds through the holes of the sieves was carried out in partnership with the State University “Ukrainian Research Institute of Forecasting and Testing of Agricultural Production Techniques and Technologies named after Leonid Pohorily” (Kharkiv Branch). The use of sieves with openings in the Cassini oval shape, instead of classic circular base openings, was found to result in an increase in throughput capacity of the sieve and open area of up to 20%.
References
Badretdinov, I., Mudarisov, S., Tuktarov, M., Dick, E., & Arslanbekova, S. (2019). Mathematical modeling of the grain material separation in the pneumatic system of the grain-cleaning machine. Journal of Applied Engineering Science, 17(4), 529-534.
Bredykhin, V., Gurskyi, P., Alfyorov, O., Bredykhina, K., & Pak, A. (2021). Improving the mechanical-mathematical model of grain mass separation in a fluidized bed. European Journal of Enterprise Technologies, 3(1), 111.
Chebrolu, K.K., Fritschi, F.B., Ye, S., Krishnan, H.B., Smith, J.R., & Gillman, J.D. (2016). Impact of heat stress during seed development on soybean seed metabolome. Metabolomics 12, 28. https://doi.org/10.1007/s11306-015-0941-1.
Cieśla, A., & Skowron, M. (2020). Analysis process of the extraction of the particles in the High Gradient Magnetic Separator. Przeglad Elektrotechniczny, 96, 98-101.
Demir, B., Eski, I., Kus, Z., & Ercisli, S. (2017). Prediction of Physical Parameters of Pumpkin Seeds Using Neural Network. Notulae Botanicae Horti Agrobotanici Cluj Napoca, 45, 22-27.
Du, J., Wang, S., He, C., Zhou, B., Ruan, Y. L., & Shou, H. (2017). Identification of regulatory networks and hub genes controlling soybean seed set and size using RNA sequencing analysis. Journal of experimental botany, 68(8), 1955-1972. https://doi.org/10.1093/jxb/erw460.
Dziki, D. (2023). The Latest Innovations in Wheat Flour Milling: A Review. Agricultural Engineering, 27(1), 147-162. https://doi.org/10.2478/agriceng-2023-0011.
Giyevskiy, A. M., Orobinsky, V. I., Tarasenko, A. P., Chernyshov, A. V., & Kurilov, D. O. (2018). Substantiation of basic scheme of grain cleaning machine for preparation of agricultural crops seeds. In IOP Conference Series: Materials Science and Engineering, 327, 042035.
Havrylenko, Y., Kholodniak, Y., Halko, S., Vershkov, O., Bondarenko, L., Suprun, O., & Gackowska, M. (2021). Interpolation with specified error of a point series belonging to a monotone curve. Entropy, 23(5), 493. doi.org/10.3390/e23050493.
Havrylenko, Y., Kholodniak, Y., Halko, S., Vershkov, O., Miroshnyk, O., Suprun, O., & Śrutek, M. (2021). Representation of a monotone curve by a contour with regular change in curvature. Entropy, 23(7), 923. doi.org/10.3390/e23070923.
Kaletnik, G., Tsurkan, O., Rimar, T., & Stanislavchuk, O. (2020). Determination of the kinetics of the process of pumpkin seeds vibrational convective drying. Eastern-European Journal of Enterprise Technologies, 1(8), 103-112.
Karaiev, O., Bondarenko, L., Halko S., Miroshnyk O., Vershkov O., Karaieva T., Shchur T Findura P., & Prístavka, M. (2021). Mathematical modelling of the fruit-stone culture seeds calibration process using flat sieves. Acta Technologica Agriculturae, 24(3), 119-123 doi.org/10.2478/ata-2021-0020
Kroulík, M., Hůla, J., Rybka, A., & Honzík, I. (2016). Pneumatic conveying characteristics of seeds in a vertical ascending airstream. Research in Agricultural Engineering, 62(2), 56-63.
Lezhenkin, O. M., Halko, S. V., Miroshnyk, O. O., Vershkov, O. O., Lezhenkin, I. O., Suprun, O. M., ... & Kasner, R. (2021, February). Investigation of the separation of combed heap of winter wheat. In Journal of Physics: Conference Series, 1781(1). doi:10.1088/1742-6596/1781/1/012016.
Liang, Z., Li, Y., De Baerdemaeker, J., Xu, L., & Saeys, W. (2019). Development and testing of a multi-duct cleaning device for tangential-longitudinal flow rice combine harvesters. Biosystems Engineering, 182, 95-106.
Mykhailov, Y., Zadosna, N., Postnikova, M., Pedchenko, G., Khmelovskyi, V., Bondar, M., Ionichev, A., Kozdęba, M. & Tomaszewska-Górecka, W. (2021). Energy Assessment of the Pneumatic Sieve Separator for Agricultural Crops. Agricultural Engineering, 25(1), 147-156. https://doi.org/10.2478/agriceng-2021-0012.
Nesterenko, A. V., Leshchenko, S. M., Vasylkovskyi, O. M., & Petrenko, D. I. (2017). Analytical assessment of the pneumatic separation quality in the process of grain multilayer feeding. INMATEH-Agricultural Engineering, 53(3), 65-70.
Olshanskiy, V., Olshanskiy, S., & Slipchenko, M. (2017). On free oscillations of a quadratic nonlinear oscillator. Ukrainian journal of mechanical engineering and materials science, 3(2), 1-10.
Piven, M. (2017). Numerical solution of the problem of spatial movement of a loose mixture in a vibrolot. Teka Komisji Motoryzacji i Energetyki Rolnictwa, 17(2), 19-28.
Piven, M., Volokh, V., Piven, A., & Kharchenko, S. (2018). Research into the process of loading the surface of a vibrosieve when a loose mixture is fed unevenly. East European Journal of Advanced Technologies, 6(1), 62-70.
Priporov, I. E., Kurasov, V. S., Samurganov, E. E., & Shepelev, A. B. (2021, March). Modeling the sunflower seeds separation process in air-sieve grain-cleaning machines. In IOP Conference Series: Materials Science and Engineering, 1111(1), 012048.
Seed Crops. (2023). https://www.statista.com/statistics/1379641/ukraine-grain-production-by-type/ (date of application 26.03. 2023).
Szwedziak, K., Dolezal, P., Tabor, S. & Ogrodniczek, J. (2023). Electrotechnical Tools and Computer Image Analysis in Assessing the Quality of Maize Grain During Storage. Agricultural Engineering, 27(1), 213-227.
Vasylkovska, K. V., Vasylkovskyi, O. M., Sviren, M. O., Petrenko, D. I., & Moroz, M. M. (2019). Determining the parameters of the device for inertial removal of excess seed. INMATEH-Agricultural Engineering, 57(1), 135-140.
Yanovych, V., Tsurkan, O., & Polevoda, Y. (2019). Development of the vibrocentric machine for the proruction of a basic mixture of homeopathic preparations. Scientific bulletin. Series D: Mechanical, 81(2), 13-26.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Vadym Bredykhin et al., published by Sciendo
This work is licensed under a Creative Commons Attribution 4.0 International License.
How to Cite
Most read articles by the same author(s)
- Ondrej Ponjičan, Aleksandar Sedlar, Pavol Findura, Agnieszka Szparaga, Sławomir Kocira, Optimisation of Osmotic Dehydration of Plums , Agricultural Engineering : Vol. 23 No. 1 (2019)
- Miroslav Prístavka, Pavol Findura, Ivan Beloev, Maciej Kuboń, Veronika Hrdá, Stepan Kovalyshyn, Taras Shchur, Verification of the Measurement System in a Production Organization , Agricultural Engineering : Vol. 26 (2022)
- Michał Plawgo, Sławomir Kocira, Andrea Bohata, Multi-Objective Optimization of the Green Extraction Conditions of Bio-Active Compounds from a Levisticum officinale WDJ Koch: Pareto Optimality and Compromise Solutions for Process Management , Agricultural Engineering : Vol. 28 (2024)
- Vadym Bredykhin, Taras Shchur, Liliia Kis-Korkishchenko, Serhii Denisenko, Serhii Ivashchenko, Andrzej Marczuk, Oleg Dzhidzhora, Maciej Kubon, Determination of Ways of Improving the Process of Separation of Seed Materials on the Working Surface of the Pneumatic Sorting Table , Agricultural Engineering : Vol. 28 (2024)
- Leszek Rydzak, Kostiantyn Vasiukov, Tomasz Guz, Marek Domin, Stepan Kovalyshyn, Piotr Kiczorowski, Effect of the Addition of Selected Unmalted Raw Materials to Barley Malt on Selected Parameters of Malt Extracts , Agricultural Engineering : Vol. 28 (2024)
- Anna Krawczuk, Jacek Ogrodniczek, Andrea Bohata, Petr Bartos, Pavel Olšan, Pavol Findura, Sławomir Kocira, Physical Properties of Plant Extracts with Biostimulant Potential Produced Using Cold Plasma and Low-Pressure Microwave Discharge , Agricultural Engineering : Vol. 28 (2024)
- Sławomir Kocira, Andrea Bohatá, Petr Bartoš, Pavel Olšan, María Cecilia Pérez-Pizá, Michał Świeca, Magdalena Sozoniuk, Agnieszka Szparaga, Jan Bedrníček, František Lorenc, Markéta Jarošová, Adéla Stupková, Jan Šíma, Technologies for producing Plant Biostimulants using Cold Plasma and Low-Pressure Microwave Discharge , Agricultural Engineering : Vol. 28 (2024)
- Vasul Salo, Valerii Pastukhov, Serhii Leshchenko, Taras Shchur, Oleg Dzhidzhora, Katarzyna Szwedziak, Stanisław Parafiniuk, Differentiation of the Composition of Combined Soil-Tillage Machines depending on the Conditions of Use , Agricultural Engineering : Vol. 28 (2024)